ZYD(4)                 FreeBSD Kernel Interfaces Manual                 ZYD(4)

NAME

     zyd - ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g wireless network driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device ehci
           device uhci
           device ohci
           device usb
           device zyd
           device wlan
           device wlan_amrr

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           if_zyd_load="YES"

DESCRIPTION

     The zyd driver provides support for wireless network adapters based
     around the ZyDAS ZD1211 and ZD1211B USB chips.

     zyd supports station and monitor mode operation.  Only one virtual
     interface may be configured at any time.  For more information on
     configuring this device, see ifconfig(8).

HARDWARE

     The following devices are known to be supported by the zyd driver:

           o   3COM 3CRUSB10075
           o   Acer WLAN-G-US1
           o   Airlink+ AWLL3025
           o   Airlink 101 AWLL3026
           o   AOpen 802.11g WL54
           o   Asus A9T integrated wireless
           o   Asus WL-159g
           o   Belkin F5D7050 v.4000
           o   Billion BiPAC 3011G
           o   Buffalo WLI-U2-KG54L
           o   CC&C WL-2203B
           o   DrayTek Vigor 550
           o   Edimax EW-7317UG
           o   Edimax EW-7317LDG
           o   Fiberline Networks WL-43OU
           o   iNexQ UR055g
           o   Linksys WUSBF54G
           o   Longshine LCS-8131G3
           o   MSI US54SE
           o   MyTek MWU-201 USB adapter
           o   Philips SNU5600
           o   Planet WL-U356
           o   Planex GW-US54GZ
           o   Planex GW-US54GZL
           o   Planex GW-US54Mini
           o   Safecom SWMULZ-5400
           o   Sagem XG 760A
           o   Sagem XG 76NA
           o   Sandberg Wireless G54 USB
           o   Sitecom WL-113
           o   SMC SMCWUSB-G
           o   Sweex wireless USB 54 Mbps
           o   Tekram/Siemens USB adapter
           o   Telegent TG54USB
           o   Trendnet TEW-424UB rev A
           o   Trendnet TEW-429UB
           o   TwinMOS G240
           o   Unicorn WL-54G
           o   US Robotics 5423
           o   X-Micro XWL-11GUZX
           o   Yakumo QuickWLAN USB
           o   Zonet ZEW2501
           o   ZyXEL ZyAIR G-202
           o   ZyXEL ZyAIR G-220

EXAMPLES

     The following example configures zyd0 to join any BSS network using WEP
     key "0x1deadbeef1", channel 11:

           ifconfig wlan create wlandev zyd0 channel 11 \
               wepmode on wepkey 0x1deadbeef1 weptxkey 1 \
               inet 192.0.2.20/24

     Join an existing BSS network, my_net:

           ifconfig wlan create wlandev zyd0 192.0.2.20/24 \
               ssid my_net

DIAGNOSTICS

     zyd%d: could not load firmware (error=%d)  An error occurred while
     attempting to upload the firmware to the onboard microcontroller unit.

     zyd%d: could not send command (error=%s)  An attempt to send a command to
     the firmware failed.

     zyd%d: sorry, radio %s is not supported yet  Support for the specified
     radio chip is not yet implemented in the driver.  The device will not
     attach.

     zyd%d: device version mismatch: 0x%x (only >= 43.30 supported)  Early
     revisions of the ZD1211 chipset are not supported by this driver.  The
     device will not attach.

     zyd%d: device timeout  A frame dispatched to the hardware for
     transmission did not complete in time.  The driver will reset the
     hardware.  This should not happen.

SEE ALSO

     intro(4), netintro(4), usb(4), wlan(4), wlan_amrr(4), wlan_ccmp(4),
     wlan_tkip(4), wlan_wep(4), networking(7), ifconfig(8), wpa_supplicant(8)

AUTHORS

     The original zyd driver was written by Florian Stoehr
     <ich@florian-stoehr.de>, Damien Bergamini <damien@openbsd.org>, and
     Jonathan Gray <jsg@openbsd.org>.

CAVEATS

     The zyd driver does not support a lot of the functionality available in
     the hardware.  More work is required to properly support the IBSS and
     power management features.

FreeBSD 15.1-STABLE-HBSD       November 10, 2024                        ZYD(4)