UVSCOM(4)              FreeBSD Kernel Interfaces Manual              UVSCOM(4)

NAME

     uvscom - USB support for SUNTAC Slipper U VS-10U serial adapters driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device usb
           device ucom
           device uvscom

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           uvscom_load="YES"

HARDWARE

     The uvscom driver supports the following adapters:

     o   DDI Pocket Air H" C@rd
     o   DDI Pocket Air H" C@rd 64
     o   NTT P-in
     o   NTT P-in m@ster

DESCRIPTION

     The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip.
     Slipper U is a PC Card to USB converter for data communication card
     adapters.

     The device is accessed through the ucom(4) driver which makes it behave
     like a tty(4).

FILES

     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state
                      devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state
                      devices

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6.
     This manual page was adopted from NetBSD by Tom Rhodes
     <trhodes@FreeBSD.org> in April 2002.

FreeBSD 15.1-STABLE-HBSD        April 26, 2017                       UVSCOM(4)