UPLCOM(4)              FreeBSD Kernel Interfaces Manual              UPLCOM(4)

NAME

     uplcom - USB support for Prolific PL-2303/2303X/2303HX serial adapters
     driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device usb
           device ucom
           device uplcom

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           uplcom_load="YES"

DESCRIPTION

     The uplcom driver provides support for various serial adapters based on
     the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.

     The device is accessed through the ucom(4) driver which makes it behave
     like a tty(4).

HARDWARE

     The uplcom driver supports the following devices and adapters:

     o   ADLINK ND-6530 USB-Serial Adapter
     o   Alcatel One Touch 535/735 Phone
     o   Alcor AU9720 USB-RS232 Serial Adapter
     o   AlDiga AL-11U Modem
     o   Alltronix ACM003U00 Modem
     o   Anchor Serial adapter
     o   ATEN UC-232A
     o   ATEN UC-232B
     o   BAFO BF-800 and BF-810
     o   Belkin F5U257
     o   BenQ S81 Phone
     o   Corega CG-USBRS232R Serial Adapter
     o   Cressi Edy (Seiko) Diving Computer
     o   ELECOM UC-SGT Serial Adapter
     o   HAL Corporation Crossam2+USB IR commander
     o   Hama USB RS-232 Serial Adapter
     o   Hamlet exaggerate XURS232
     o   HP LD220 Point-Of-Sale (POS) Display
     o   IOGEAR UC-232A
     o   I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5
     o   iTegno WM1080A GSM/GFPRS Modem
     o   iTegno WM2080A CDMA Modem
     o   Leadtek 9531 GPS
     o   Micromax 610U Modem
     o   Microsoft Palm 700WX
     o   Mobile Action MA-620 Infrared Adapter
     o   Motorola Cables
     o   Nokia CA-42 Cable
     o   OTI DKU-5 cable
     o   Panasonic TY-TP50P6-S flat screen
     o   PLX CA-42 Phone Cable
     o   PLANEX USB-RS232 URS-03
     o   Prolific Generic USB-Serial Adapters
     o   Prolific Generic USB-Serial Adapters (HXN)
     o   Prolific Pharos USB-Serial Adapter
     o   Prolific USB-Serial Controller D
     o   RATOC REX-USB60
     o   Radio Shack USB Serial Cable
     o   Sagem USB-Serial Adapter
     o   Samsung I330 Phone Cradle
     o   Sandberg USB to Serial Link (model number 133-08)
     o   Sanwa KB-USB2 Multimeter cable
     o   Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones
     o   Sitecom USB-Serial Adapter
     o   SMART Technologies USB-Serial Adapter
     o   Sony QN3 Phone Cable
     o   Sony Ericsson Datapilot
     o   Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables
     o   SOURCENEXT KeikaiDenwa 8 (with and without charger)
     o   Speed Dragon USB-Serial Cable
     o   Syntech CPT-8001C Barcode Scanner
     o   TDK UHA6400 and UPA9664 USB-PHS Adapters
     o   TRENDnet USB to Serial Converter (TU-S9)
     o   Tripp-Lite U209-000-R USB-Serial Adapter
     o   UIC HCR331 Magnetic Stripe Card Reader
     o   UIC MSR206 Magnetic Stripe Card Reader
     o   Willcom W-SIM DD PHS terminal.(WS002IN)
     o   YC-Cable USB-Serial Adapter
     o   Zeagle N2iTion3 Diving Computer

SYSCTL VARIABLES

     The following variables are available as both sysctl(8) variables and
     loader(8) tunables:

     hw.usb.uplcom.debug
             Debug output level, where 0 is debugging disabled and larger
             values increase debug message verbosity.  Default is 0.

FILES

     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state
                      devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state
                      devices

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uplcom driver appeared in NetBSD 1.6.  This manual page was adopted
     from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

FreeBSD 15.1-STABLE-HBSD        January 7, 2021                      UPLCOM(4)