IWN(4)                 FreeBSD Kernel Interfaces Manual                 IWN(4)

NAME

     iwn - Intel IEEE 802.11n wireless network driver

SYNOPSIS

     To compile this driver into the kernel, include the following lines in
     your kernel configuration file:

           device iwn
           device pci
           device wlan
           device firmware

     You also need to select a firmware for your device.  Choose one from:

           device iwn1000fw
           device iwn100fw
           device iwn105fw
           device iwn135fw
           device iwn2000fw
           device iwn2030fw
           device iwn4965fw
           device iwn5000fw
           device iwn5150fw
           device iwn6000fw
           device iwn6000g2afw
           device iwn6000g2bfw
           device iwn6050fw

     Or you can use

           device iwnfw

     to include them all.

     Alternatively, to load the driver as a module at boot time, place the
     following lines in loader.conf(5):

           if_iwn_load="YES"
           iwn1000fw_load="YES"
           iwn100fw_load="YES"
           iwn105fw_load="YES"
           iwn135fw_load="YES"
           iwn2000fw_load="YES"
           iwn2030fw_load="YES"
           iwn4965fw_load="YES"
           iwn5000fw_load="YES"
           iwn5150fw_load="YES"
           iwn6000fw_load="YES"
           iwn6000g2afw_load="YES"
           iwn6000g2bfw_load="YES"
           iwn6050fw_load="YES"

DESCRIPTION

     The iwn driver supports station and monitor mode operation.  Only one
     virtual interface may be configured at any time.  For more information on
     configuring this device, see ifconfig(8).

     This driver requires the firmware built with the iwnfw module to work.

HARDWARE

     The iwn driver provides support for:

     o   Intel Centrino Advanced-N 6200
     o   Intel Centrino Advanced-N 6205
     o   Intel Centrino Advanced-N 6230
     o   Intel Centrino Advanced-N 6235
     o   Intel Centrino Advanced-N + WiMAX 6250
     o   Intel Centrino Ultimate-N 6300
     o   Intel Centrino Wireless-N 100
     o   Intel Centrino Wireless-N 105
     o   Intel Centrino Wireless-N 130
     o   Intel Centrino Wireless-N 135
     o   Intel Centrino Wireless-N 1000
     o   Intel Centrino Wireless-N 1030
     o   Intel Centrino Wireless-N 2200
     o   Intel Centrino Wireless-N 2230
     o   Intel Centrino Wireless-N 4965
     o   Intel Centrino Wireless-N 5100
     o   Intel Centrino Wireless-N 6150
     o   Intel Centrino Wireless-N 6200
     o   Intel Centrino Wireless-N 6250
     o   Intel Centrino Wireless-N + WiMAX 6150
     o   Intel Ultimate N WiFi Link 5300
     o   Intel Wireless WiFi Link 4965
     o   Intel WiFi Link 5100
     o   Intel WiMAX/WiFi Link 5150
     o   Intel WiMAX/WiFi Link 5350

EXAMPLES

     Join an existing BSS network (i.e., connect to an access point):

           # ifconfig wlan create wlandev iwn0 inet 192.168.0.20 \
               netmask 0xffffff00

     Join a specific BSS network with network name `my_net':

           # ifconfig wlan create wlandev iwn0 ssid my_net up

     Join a specific BSS network with 64-bit WEP encryption:

           # ifconfig wlan create wlandev iwn0 ssid my_net \
                   wepmode on wepkey 0x1234567890 weptxkey 1 up

     Join a specific BSS network with 128-bit WEP encryption:

           # ifconfig wlan create wlandev iwn0 wlanmode adhoc ssid my_net \
               wepmode on wepkey 0x01020304050607080910111213 weptxkey 1

DIAGNOSTICS

     iwn%d: device timeout  The driver will reset the hardware.  This should
     not happen.

     iwn%d: firmware error  The onboard microcontroller crashed for some
     reason.  The driver will reset the hardware.  This should not happen.

     iwn%d: timeout waiting for firmware initialization to complete  The
     onboard microcontroller failed to initialize in time.  This should not
     happen.

     iwn%d: could not load firmware image '%s'  The driver failed to load the
     firmware image using the firmware(9) subsystem.  Verify the iwnfw(4)
     firmware module is present.

     iwn%d: could not load boot firmware  An attempt to upload the boot
     firmware image to the onboard microcontroller failed.  This should not
     happen.

     iwn%d: could not load microcode  An attempt to upload the microcode image
     to the onboard microcontroller failed.  This should not happen.

     iwn%d: could not load main firmware  An attempt to upload the main
     firmware image to the onboard microcontroller failed.  This should not
     happen.

SEE ALSO

     iwnfw(4), pci(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4),
     networking(7), ifconfig(8), wpa_supplicant(8)

AUTHORS

     The original iwn driver was written by Damien Bergamini
     <damien.bergamini@free.fr>.

FreeBSD 15.1-STABLE-HBSD       October 17, 2024                         IWN(4)